KALEIDOSCOPE ETCHING PRIMER 0.946L- 28893
- Category:collection1,HARDWARE,Home page,New Arrival,New Arrivals,on sale,OTHER PAINT SUPPLIES,PAINT TOOLS & SUPPLIES,PAINTS & GLUES,Today's Deal,TOOLS
Shop and Earn Reward Points.
- Order within
KALEIDOSCOPE ETCHING PRIMER 0.946L-
Description:
Specialist Range Of Products Ensures Both Householders And Professional Users Maximum Durability And Protection On A Wide Variety Of Surfaces And Conditions.
Features:
Surface Preparation:
Unpainted Iron, steel or weathered aluminium or galvanize:- Remove all grease, dirt, rust, white rust and millscale. Wirebrush, solvent wipe, scrape and abrade where necessary.
New aluminium or galvanize:- Abrade to remove white rust. Then solvent wipe to remove oil or grease and dirt. Pre-treat with Berger Etching Wash Primer.
Application:
Apply only to clean surfaces free from dust, rust, grease, wax and surfaces that are damp.
- Ensure contents are thoroughly stirred. Use only clean brushes, rollers and containers etc.
- Ready for use by brush or roller. Thin as required for spraying equipment.
Drying:- Touch dry in 2 hours. Allow to dry at least 18 hours before over-coating.
DO NOT add any oil, varnish or other paint to Berger Zinc Chromate Metal Primer.
KALEIDOSCOPE ETCHING PRIMER 0.946L-
Description:
Specialist Range Of Products Ensures Both Householders And Professional Users Maximum Durability And Protection On A Wide Variety Of Surfaces And Conditions.
Features:
Surface Preparation:
Unpainted Iron, steel or weathered aluminium or galvanize:- Remove all grease, dirt, rust, white rust and millscale. Wirebrush, solvent wipe, scrape and abrade where necessary.
New aluminium or galvanize:- Abrade to remove white rust. Then solvent wipe to remove oil or grease and dirt. Pre-treat with Berger Etching Wash Primer.
Application:
Apply only to clean surfaces free from dust, rust, grease, wax and surfaces that are damp.
- Ensure contents are thoroughly stirred. Use only clean brushes, rollers and containers etc.
- Ready for use by brush or roller. Thin as required for spraying equipment.
Drying:- Touch dry in 2 hours. Allow to dry at least 18 hours before over-coating.
DO NOT add any oil, varnish or other paint to Berger Zinc Chromate Metal Primer.
