Timberline Router Bit Carbide Tipped Flush Trim 3/8 Diameter x 1/2 x 1/4 Inch Shank with Ball Bearing. 2&3 Flute with Ball Bearing Guide- #190-14
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great
-50%
Timberline Router Bit Carbide Tipped Flush Trim 3/8 Diameter x 1/2 x 1/4 Inch Shank with Ball Bearing. 2&3 Flute with Ball Bearing Guide- #190-14
Timberline Router Bit Carbide Tipped Flush Trim 3/8 Diameter x 1/2 x 1/4 Inch Shank with Ball Bearing. 2&3 Flute with Ball Bearing Guide- #190-14
Timberline Router Bit Carbide Tipped Flush Trim 3/8 Diameter x 1/2 x 1/4 Inch Shank with Ball Bearing. 2&3 Flute with Ball Bearing Guide- #190-14
Timberline Router Bit Carbide Tipped Flush Trim 3/8 Diameter x 1/2 x 1/4 Inch Shank with Ball Bearing. 2&3 Flute with Ball Bearing Guide- #190-14
AHMEGA

Timberline Router Bit Carbide Tipped Flush Trim 3/8 Diameter x 1/2 x 1/4 Inch Shank with Ball Bearing. 2&3 Flute with Ball Bearing Guide- #190-14

Available:In Stock
Save $ 80.58 TTD 50% off

Shop and Earn Reward Points.

$ 80.58 TTD $ 161.16 TTD
Image
  • Order within

Timberline Router Bit Carbide Tipped Flush Trim 3/8 Diameter x 1/2 x 1/4 Inch Shank with Ball Bearing. 2&3 Flute with Ball Bearing Guide- #190-14

Product Description:

Use any of the flush trimming bits below for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top.
A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.

Timberline Router Bit Carbide Tipped Flush Trim 3/8 Diameter x 1/2 x 1/4 Inch Shank with Ball Bearing. 2&3 Flute with Ball Bearing Guide- #190-14

Product Description:

Use any of the flush trimming bits below for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top.
A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.